Over the past five years the world has seen a dramatic fall in the cost of solar energy, particularly rooftop solar panels or solar photovoltaic power. It is now a real alternative and considerable player in the power markets.
In Australia more than 4 gigawatts (peak generation capacity) of solar panels are mounted on more than a million Australian roofs to date, adding up to about 7% of Australia’s electricity generation capacity.
As solar panels do not always produce all the electricity they possibly can, rooftop solar today contributes around 2% of Australia’s total electricity generation. But in some states during the day, solar’s contribution already reaches double digits. You can watch solar generation live here.
But what’s next for rooftop solar? It’s likely that costs will continue to fall, eventually making solar the dominant source of electricity in many parts of the world including Australia. Here’s the evidence.
The following 2014 graph from investment bank Bernstein Research shows just how fast the cost of solar has fallen compared to other energy sources.
The graph plots the price for one million British thermal units of various fossil fuels and solar power. It shows that the price for solar energy came down dramatically in comparison to fossil fuels and has just started to undercut the price for some of these such as petroleum and liquefied natural gas (LNG).
Currently, solar panels in Australia produce energy at a cost of A10c per kilowatt hour or less, and it is likely that by 2020 this will fall to A6-7c per kilowatt hour or less. This puts solar power into a very competitive spot within the next five years.
Solar panels a cheap commodity
We can also look at the representative German spot-market price of solar panels, as in the following graph sourced from the Fraunhofer Institute for Solar Energy Systems ISE.
This shows that as the cumulative production of solar panels doubles, the price is reduced by about 20% – prices are now 40 times lower than they were 30 years ago.
This is known as the “learning curve”, and can be used to predict the future cost of solar panels, although it can’t predict the exact year when a certain price will happen as the production volume is correlated to market and policy forces.
Fundamentally, falling manufacturing costs are driving this trend, in turn driven by improving manufacturing techniques. By 2019 it’s likely that manufacturing costs for solar panels will reduce by 30-50% again.
Already today solar panels only cost around A60c per kilowatt peak capacity in Australia, and the cost of the panels no longer dominates the cost of installing a solar system on a roof or the ground. Other installation costs – such as mounting and labour – are more difficult to reduce, such that further installation reductions may be more challenging and slower.
To enable further cuts to the price of solar energy, we need to foremost look at improving the efficiency of solar panels, which will most directly lower the total cost for solar power.
Cut costs by increasing efficiency
Solar panels don’t convert all the sun’s energy into electricity. What proportion they convert is known as efficiency.
Efficiency is the most important factor in reducing the costs of solar – because the greater the efficiency of your panels, the fewer materials you need per amount of generated energy (that is, per kilowatt hour).
This graph above (from the US National Renewable Energy Laboratory) shows that all solar panel technologies have been getting more efficient. Currently commercial solar panel efficiencies are from 16% to 21%, but recently a new record of 46% was set in Germany. University of New South Wales has achieved efficiencies of 40%. So there is a lot of room for improvements generally, but also for current commercial solar flat panels.
Solar panel technology may be the technology with the greatest potential to improve efficiency compared with other renewable technologies.
What does the future hold?
We can sum all of this up by looking at how much energy goes into producing solar panels versus how much they produce.
A recent study has shown that in five years a solar panel will produce enough energy in six months to pay back all the energy used in manufacturing it. That means after six months the panels will be a net source of energy.
This is known as energy return on energy invested – and we can compare it across a variety of energy sources. The energy return of oil and gas is declining, and solar is catching up. By 2030 solar will likely surpass oil and gas.
So from whatever angle you look at it, it seems clear that current and future developments will leave solar power from rooftops and grount-mounted plants as likely the most cost competitive primary source of energy in Australia. This competitiveness shall allow economically for a variety of solutions (e.g. storage, demand management, solar fuels) to address the variability of supply and thus extend the use of solar power from offsetting daytime peaks today to supplying 40, 50 or even 60% of the total energy needs.
Source: The Conversation. Reproduced with permission.