A small town in Germany becomes a testing ground for a smart grid

RMI

rsz_blog_2014_11_06-1

A small German town in southern Bavaria is participating in an interesting experiment proving that a high-renewables future is viable. Wildpoldsried (pop. 2,600) currently produces 500 per cent more energy than it needs through renewable energy systems, and sells the surplus power back to the grid. Though this is celebrated as a huge success in many circles, it’s not without its challenges, including how to integrate such a large local surplus of renewable energy into the greater grid while maintaining network stability. Which is why regional utility AÜW and Siemens chose Wildpoldsried to test out a smart grid that automatically stabilizes the power network.

BECOMING PROSUMERS

The story began in 1997, when Wildpoldsried mayor Arno Zengerle and the city council decided they wanted to revitalize the community and encourage growth without incurring debt. The town adopted the Innovative Leadership Plan, WIR-2020, to reinvent Wildpoldsried based on renewable energy, green building, and water resource protection. As part of the plan the town set a goal of producing 100 percent of its electricity from renewable energy by 2020.

Things happened much faster than planned—17 years later, the town now has five biogas plants, almost 5 MW of solar PV, 11 wind turbines with a total capacity of more than 12 MW, a biomass district heating network, three small hydro power plants, and 2,100 square meters of solar thermal systems. While the first two wind turbines were partly financed by a small grant from the state of Bavaria, local residents—many of them dairy farmers—have financed all following turbines. Those turbines, which generated over 17,000 MWh of electricity in 2013, have a payback of 10 years, and then generate 80 percent of the earnings of the dairy farms.

All public buildings, 120 private residences, and 4 companies are connected to the district heating system. The biomass for the system is all sourced from waste wood from local forests and generates 8.2 MMBtu of heat each year. The majority of the PV systems in the town are on private residences—about 200 homes now have rooftop solar. Nine municipal buildings including the primary school, recycling facility, and sports center also have PV systems. The electricity generated from the solar, wind, and biomass is sold to AÜW under a fixed-price 20-year power purchase agreement (PPA).

IRENE TO THE RESCUE

While all this excess renewable energy is bringing in over $7 million a year in revenue, it was also causing a headache for AÜW, which has to maintain grid stability. So in 2010 AÜW chose Wildpoldsried as the site for a smart grid experiment. Meanwhile, Siemens was looking for a grid operator to test its new smart grid technologies. The two teamed up and launched a $6 million project called IRENE—Integration of Regenerative Energy and Electric Mobility.

The first step in IRENE was to install 200 measuring devices at renewable energy systems throughout the town. The devices measure different electrical variables such as current, voltage, and frequency, to determine who’s feeding energy into the grid, who’s consuming energy from the grid, and to find any problems affecting the network’s stability. Once any problems are identified, a variable transformer offsets voltage fluctuations. The town has also incorporated 138 kWh of battery storage into the system, which receives and discharges electricity to help stabilize the grid.

KEEPING THE GRID STABLE WITH SOEASY

The key to the smart grid is a self-organizing automation system called SOEASY, which balances supply and demand to keep the grid stable. It is IRENE’s brain, so to speak. SOEASY considers weather, electricity prices, power quality, and other factors when deciding whether to send electricity into the grid or to storage. It’s actually more complex than the name makes it sound. SOEASY contains five different software modules—the personal energy agent, balance master, area administrator, network transport agent, and energy police.

  • Personal energy agent—Every “prosumer” in the town has a personal energy agent. This small device allows the energy producer to dictate how much power he or she wants to sell, at what time, and at what minimum price, in 15-minute intervals. It is, in some sense, a distributed energy resource marketplace on the scale of one town embedded in a far larger grid.
  • Balance master—The balance master is installed at AÜW and decides which personal energy agent offers it will accept to cover demand in the grid. It can plan adjustments up to a day in advance, and takes into account different parameters such as weather changes.
  • Area administrator—The area administrator helps AÜW maintain network stability if too much energy is being fed into the grid. The area administrator can modify the input from different sources via commands to their personal energy agents, can send energy to storage, or can adjust the voltage through the variable transformer.
  • Network transport agent—The network transport agent (NTA) collects data from the energy producers, consumers, and the grid, and supplies it to the area administrator, which intervenes if maximum voltage is exceeded, and to the balance master, which decides what power can be accepted without overloading the grid.
  • Energy Police—The energy police makes sure that all energy producers supply the power promised by their personal energy agents, and that no power is illegally siphoned off.

INTEGRATING EVS INTO THE SMART GRID

One way to help balance the grid is to use electric vehicles to store excess energy. Wildpoldsried now has 32 electric vehicles that are leased to residents. When there’s an energy surplus, the vehicle’s batteries are given charging priority. The plan for the future is to have the vehicles return electricity to the grid in case of power shortages.

IRENE ended in 2013, and the developed smart grid now serves as the foundation for IREN2 (Future Viable Networks for Integration of Renewable Energy Systems). The goal of IREN2 is to study how energy systems with distributed power generation, battery storage, district heating, biogas plants, and diesel generators can be technically and economically optimized.

The renewable energy systems in Wildpoldsried have done more than help Germany move towards its renewable energy goals. The renewable energy systems have created 140 new jobs, led to construction of an ecological training center, and increased tourism, with over 100 delegations visiting the town each year. The increased revenue has allowed the town to have its own doctors, recreation center, fire station, and other amenities not available in many other towns of a similar size. And the success of the smart grid will enable places to develop even larger smart grids for all of Germany and the world.

 

Source: RMI. Reproduced with permission.

Comments

4 responses to “A small town in Germany becomes a testing ground for a smart grid”

  1. Jason Avatar
    Jason

    Who owns this grid? Is the towns grid run by the local Council I’d be interested to know how the town grid is integrated into the larger grid in terms of ownership…

    1. john Avatar
      john

      In Germany there are 4 major power companies and a huge number of local controlled community owned grids and yes they are integrated into the larger grid

  2. john Avatar
    john

    Peter Varadi outlines the German experience very well from beginning to recently.
    Germany has a lot of community grid operated systems.
    Perhaps we should learn from their experience I can see this being used in Western NSW for instance.

  3. DogzOwn Avatar
    DogzOwn

    Wildpoldsried mayor Arno Zengerle, was truly sensational keynote speaker at C4CE conference in Canberra in June. Its important to emphasise that so much renewable energy is entirely community owned.

Get up to 3 quotes from pre-vetted solar (and battery) installers.