IBM’s concentrated PV/thermal hybrid with water, air-con

Solar Love

How does a cost-competitive photovoltaic system that is able to concentrate sunlight 2000 times and then capture 80% of the concentrated energy sound?

Pretty good, right?

Such a system is currently being developed by researchers at IBM Research, Airlight Energy, ETH Zurich, and Interstate University of Applied Sciences Buchs NTB, after winning a three-year $2.4 million grant from the Swiss Commission for Technology and Innovation.

Image Credit: © IBM

Image Credit: © IBM

And in addition to generating electricity, the system can itself desalinate water and provide air-conditioning, useful features for the sunny and remote regions that the system is designed for.

An economical High Concentration Photovoltaic Thermal (HCPVT) system, that in addition to supplying electricity can desalinate water and provide air conditioning, is the complete package as far as many regions of the world are concerned.

The prototype system makes use of a large parabolic dish, composed of a number of mirror facets, which are coordinated to a sun tracking system. The system automatically repositions itself to the optimum angle for power generation.

The sunlight that hits the mirrors is reflected off of them onto a number of microchannel-liquid cooled receivers with triple junction photovoltaic chips. Every one of these 1×1 centimeter chips “can convert 200-250 watts, on average, over a typical eight hour day in a sunny region.” And there are hundreds of these chips in the design, providing a total of about 25 kilowatts of electrical power.

Screen Shot 2013-04-25 at 1.49.47 PM

 

The press release notes:

 

The photovoltaic chips are mounted on micro-structured layers that pipe liquid coolants within a few tens of micrometers off the chip to absorb the heat and draw it away 10 times more effective than with passive air cooling. The coolant maintains the chips almost at the same temperature for a solar concentration of 2,000 times and can keep them at safe temperatures up to a solar concentration of 5,000 times.

The direct cooling solution with very small pumping power is inspired by the hierarchical branched blood supply system of the human body and has been already tested by IBM scientists in high performance computers, including Aquasar. An initial demonstrator of the multi-chip receiver was developed in a previous collaboration between IBM and the Egypt Nanotechnology Research Center.

“We plan to use triple-junction photovoltaic cells on a micro-channel cooled module which can directly convert more than 30 percent of collected solar radiation into electrical energy and allow for the efficient recovery of an additional 50 percent waste heat,” said Bruno Michel , manager, advanced thermal packaging at IBM Research. “We believe that we can achieve this with a very practical design that is made of lightweight and high strength concrete, which is used in bridges, and primary optics composed of inexpensive pneumatic mirrors — it’s frugal innovation, but builds on decades of experience in microtechnology.

By utilizing such a high concentration of sunlight, and the rather low cost of the design, the researchers think that they can realize a cost per aperture area under $250 per square meter — that is roughly 3 times lower than in similar systems. According to them, “the levelized cost of energy will be less than 10 cents per kilowatt hour (KWh). For comparison, feed in tariffs for electrical energy in Germany are currently still larger than 25 cents per KWh and production cost at coal power stations are around 5-10 cents per KWh.”

One of the innovations of the new system is its collection and repurposing of the “waste heat” generated by solar thermal. By utilizing the heat instead of simply allowing it to dissipate, it becomes possible to cheaply desalinate water and provide cooling via a thermal-driven adsorption chiller, while also solving the overheating problems of solar chips.

In order to efficiently capture the waste heat, the researchers made use of an advanced technology that was already developed and in use, the water-cooling systems for very high-performance computers such as Aquasar and SuperMUC. While that heat is simply reused to provide space heating for the facilities, the captured heat in this instance will be used to heat salty water that is then distiller via vaporization. The researchers say that the system could provide up to “30-40 liters of drinkable water per square meter of receiver area per day, while still generating electricity with a more than 25 percent yield or two kilowatt hours per day.” So with a large array of these systems it would be very possible to provide enough water for a small city/town.

The system also possesses the ability to provide air conditioning, via a thermal driven adsorption chiller. “An adsorption chiller is a device that converts heat into cooling via a thermal cycle applied to an absorber made from silica gel, for example. Adsorption chillers, with water as working fluid, can replace compression chillers, which stress electrical grids in hot climates and contain working fluids that are harmful to the ozone layer.”

Researchers are currently testing a prototype of the HCPVT system at IBM Research — Zurich.

This article was originally published at Solar Love. Reproduced with permission.

Comments

3 responses to “IBM’s concentrated PV/thermal hybrid with water, air-con”

  1. Gus Griffin Avatar
    Gus Griffin

    So when do they expect them to be commercially available? I want one on my farm!!

    1. Bob_Wallace Avatar
      Bob_Wallace

      Panels, Gus. You can get them today and have them working within a week.

  2. Bob_Wallace Avatar
    Bob_Wallace

    According to them, “the levelized cost of energy will be less than 10 cents per kilowatt hour (KWh).

    That is not good enough. PV solar is already under 10 cents per kWh and heading lower. If they want to compete with PV they better hit 5 cents.

Get up to 3 quotes from pre-vetted solar (and battery) installers.