World’s biggest offshore wind turbine rolls off production line

Published by

The offshore wind industry has marked a new milestone this week, with the world’s most powerful turbine – a 16MW giant from Goldwind and China Three Gorges – rolling off the production line in east China’s Fujian province.

The milestone achievement was Tweeted by CTG on Wednesday, boasting the turbine’s world-topping per-unit capacity, its 146 metre hub and its impeller diameter of 252 metres, all while being the world’s lightest unit per MW weight.

CTG says that, at full wind speed, the turbine can generate 34.2kWh of power after rotating a full turn.

The annual output of just one of the offshore turbines, estimated to average over 66 million kWh, can meet the annual demand of 36,000 households, “save 22K tonnes of standard coal, and reduce 54K tonnes of CO2,” the Tweets said.

The new offshore turbine is the world’s largest per-unit capacity by some way, a full 2MW ahead of Siemens Gamesa’s 14MW offshore turbine, a prototype of which was installed in September 2021.

GE is using 13MW Haliade-X units for the massive 3.6GW Dogger Bank offshore wind project in the UK. While the Siemens Gamesa 11MW wind turbines are the biggest to be actually installed at a commercial scale to date.

“The successful roll-out of the 16MW unit marks that my country’s wind power equipment industry has achieved a historic leap from ‘following’ to ‘running alongside’ and then to ‘leading’, creating the latest benchmark for the development of global offshore wind power equipment,” said CTG chairman Lei Mingshan.

He added that the massive new turbine has “overcome a series of key technological problems,” including ultra-long flexible blades, large spindle bearings, and miniaturisation of ultra-large capacity generators.

“The application of high-power offshore wind turbine can greatly save the use of sea areas,” Lei Mingshan said.

Goldwind chief engineer Zhai Endi added: “The 16MW unit has made important technological breakthroughs in the R&D and manufacturing of key core components such as large main shaft bearings and ultra-long lightweight blades.”

The two Chinese companies say the design of the unit can actively adjust the operation mode for typhoons and other adverse conditions to ensure safe and efficient power generation.

Sophie Vorrath

Sophie is editor of Renew Economy and editor of its sister site, One Step Off The Grid . She is the co-host of the Solar Insiders Podcast. Sophie has been writing about clean energy for more than a decade.

Share
Published by

Recent Posts

Swiss commodity trader gets approval to buy Zen retail business and PPA deals. Will it take on Big 3?

One of the world's biggest commodity traders moves into Australia electricity retail business - competition…

26 June 2026

Judge dismisses legal bid to prevent gas fracking in the Top End

Activists have lost their court bid to prevent gas exploration in the Northern Territory after…

26 June 2026

Nuclear reactors taken offline in France, as extreme heat pushes river temperatures into danger zone

EDF has taken nearly 10% of its nuclear power capacity offline this week, to avoid…

26 June 2026

South Australia swings from three days of 100 pct renewables to worst drought in 7 years

South Australia just experienced its worst wind drought in seven years. The fleet of short-duration…

26 June 2026

“Not consulted:” Local councils in the dark on LNP plan to “scrap” huge renewable zone and “evaporate” benefits

Local government leaders say they were in the dark over state Coalition plans to revise…

26 June 2026

Solar Insiders Podcast: Virtual networks and the real pursuit of energy democracy

Deakin University's Andrea La Nauze on the early findings from an Australia-first trial of technology…

26 June 2026