Solar

Why adding holograms to solar cells could lead to massive performance boost

Published by

Holograms could hold the secret to solving a common problem with solar cell designs, allowing solar cells to capture sunlight that would normally be wasted and boosting electricity yields by as much as five per cent.

The research, recently published in the Journal of Photonics for Energy, was led by scientists from the University of Arizona who have proposed the use of ‘holographic light collectors’ to steer light that would normally be wasted towards parts of a solar cell that can convert the sunlight into useful electricity.

The problem the researchers were trying to solve is how to utilise parts of solar cells that are usually blocked from receiving sunlight due to the way solar cells are designed.

For example, the surfaces of solar PV cells are usually patterned with a metal grid, made from copper coated with silver or aluminium and called bus bars or ‘fingers’, on their surface. This metal grid is key to collecting the useful electricity produced in solar cells – but these ‘fingers’ also cover up parts of a solar cell that could otherwise be used to convert more sunlight into electricity.

Solar cell designers have long juggled the need to optimise the number and thickness of these metal gridlines, which can increase the amount of electricity collected from a solar cell, with the need to maximise the amount of uncovered solar cell surface area that can be directly exposed to sunlight to boost production.

In commercially available solar cells, as much as five to ten per cent of a solar cell’s service could be covered up and rendered inactive as a result of these design considerations.

Front contact grid lines on a solar cell.
Front contact grid lines on a solar cell.

To solve this problem, University of Arizona PhD student Jianbo Zhao developed a holographic light collector that can be incorporated into solar cell designs that allows light that would otherwise go unused to be redirected to parts of a solar cell that are not encumbered by the metal grid contacts on their surface.

Zhao worked under the supervision of professor of electrical and computer engineering and optical sciences, Raymond K. Kostuk, and collaborated with a fellow PhD student, Benjamin Chrysler. The researchers found that by adding the holographic light collector to solar cell designs, the overall energy yield of a solar cell could be improved by as much as five per cent.

The special holograms allow sunlight to be split up across different wavelengths, and through the use of a light diffuser, the light can then be directed towards parts of a solar cell to be converted into electricity.

Editor-in-chief of the Journal of Photonics for Energy, Sean Shaheen from the University of Colorado Boulder, said that the solution proposed by Zhao was noteworthy because it was a low cost and easily scalable design technique that produced a significant improvement in energy yield.

“The enhancement of approximately five per cent in annual yield of solar energy enabled by this technique could have large impact when scaled to even a small fraction of the 100s of gigawatts of photovoltaics being installed globally,” Shaheen said.

“Professor Kostuk’s team has demonstrated their holographic approach with a low-cost material based on gelatin, which is readily manufactured in large quantity. And while gelatin is normally derived from animal collagen, progress in lab-derived versions has made it likely that synthetic alternatives could be used at scale.”

The researchers found that the addition of the holographic materials had the greatest impact on solar panel performance when the solar panels were combined with a sun tracking system, but notable improvements in performance could still be achieved for stationary panels.

Michael Mazengarb is a climate and energy policy analyst with more than 15 years of professional experience, including as a contributor to Renew Economy. He writes at Tempests and Terawatts.
Michael Mazengarb

Michael Mazengarb is a climate and energy policy analyst with more than 15 years of professional experience, including as a contributor to Renew Economy. He writes at Tempests and Terawatts.

Recent Posts

Bowen launches bold climate agenda to send a message to “board rooms and living rooms”

Countries could be urged to phase out fossil fuels faster and developed countries to reach…

17 November 2026

Chart of the day: The world is trapping so much extra heat, it’s like Icarus flying closer to the sun

Here's another way to think about what warming our planet looks like – and why…

16 November 2026

Australia risks becoming “rust-bucket state,” says Kean, as regional electrification plans crush coal exports

Climate Change Authority says Australia must act to take a slice of the trillion-dollar pledge…

16 November 2026

CIS-winning solar-battery hybrid heads to IPC, sent by local objectors from hotly contested REZ

A NSW solar project has seen big changes since a gruelling public submission process in…

16 November 2026

Australian BIPV pioneer secures contract to supply solar glass cladding for Singapore building

ASX-listed ClearVue says the lucrative new order proves the company’s technology “can make solar disappear"…

16 November 2026

Home battery boom delivers jump in “substandard” installations, regulator finds, up to 2 pct deemed “unsafe”

The huge boom in home batteries under the federal rebate has prompted the Clean Energy…

16 November 2026