Chinese technology company Sigenergy, which leads home battery installations in Australia, has targeted the commercial and industrial market with the unveiling of a new battery energy storage system (BESS) which boasts more capacity per cabinet.
The new product, SigenCube, is billed as a larger and all-in-one BESS for commercial and industrial sites with more capacity per cabinet and built-in power conversion, energy management, and distribution.
“Home batteries have gone mainstream in Australia, and businesses now want the same control over their power costs and reliability,” said Will Hall, managing director of Sigenergy ANZ.
“SigenCube is our answer for the sites where space, noise and heavy loads have held storage back.”
The unveiling is the latest of a spree of new products unveiled by battery storage suppliers since the federal government increased the rooftop solar rebates to 1 megawatt systems, which will in turn require bigger batteries to store excess solar.
Sigenergy, which ranks as the top home battery supplier in terms of number of systems installed, says the SigenCube ES401 cabinet holds 401-kilowatt-hours (kWh) in a 1.1-metre by 1.65-metre footprint, delivering an energy density of over 220 kWh per square metre.
This means that, for a 4MWh project, SigenCube needs 54.5-metres-squared (m²), compared with more than 80 m² for traditional solutions, a saving of over 30 per cent.
Sigenergy also claims that, with each cabinet boasting its own energy management system, up to 100 units can run in parallel without an external data logger. Each unit is also pre-commissioned at the factory, meaning that basic setup and diagnostics takes only 3 to 5 minutes on site through an app.
SigenCube also runs below 60 decibels (dB) within one metre, around the level of a normal conversation, meaning that it can sit close to offices, commercial centres, and neighbours.
A 150 per cent overload for 10 seconds also carries air compressors, conveyors, and motor-driven pumps through their start-up surges without tripping. Additionally, AI thermal management uses live cell data and day-ahead load forecasts to adjust cooling, a step which reportedly cuts auxiliary power use by up to 20 per cent.
Sigenergy says that the SigenCube will be available for off-grid projects and in New Zealand from January 2027, and will be available for grid-connected projects in Australia after obtaining Clean Energy Council listing.







